SERV Plant Hire
Manitou MT 625 H Telehandler - SERV Plant Hire
Share on facebook
Share on twitter
Share on linkedin

Manitou MT 625 H Telehandler

The Manitou MT 625 H Telehandler is the perfect hire choice for building sites and renovation projects involving lower heights.

With a width of less than 1.8 metres and a height of under 2 metres in height, the MT 625 H can easily pass under thresholds and navigate congested areas.

Maintenance is made easy by the wide opening angle of the bonnet. The 90-l gear pump allows for simultaneous movement of the boom and telescope for increased productivity.

Easy to use, this handler features an ergonomic instrument panel and JSM-equipped joystick to easily execute manoeuvres.

  • Very good load chart capable of supporting up to 2.5 tonnes at 5.85 meters.
  • All terrain machine that can adapt to the constraints of your work site.
  • 4-wheel steering for tight turning circles in confined spaces.
  • Hydrostatic transmission provides flexible and progressive control for positioning loads with more accuracy and safety.

Max. capacity (kg) – 2500

Max. lifting height (m) – 5.85

Max. Reach (m) – 3.4

Breakout force with bucket (daN) – 3427

Overall Length to Carriage (m) – 3.9

Overall Width (m) – 1.81

Overall Height (m) – 1.92

Wheelbase (m) – 2.3

Ground Clearance Centre (m) – 0.33

Overall Cab Width (m) – 0.79

Tilt-up Angle – 12 °

Outer Turning Radius (m) – 3.31

External Turning Radius (over tyres) (m) – 3.31

Unladen Weight (with forks) (kg) – 4800

Tyres Type – Pneumatic

Standard Tyres – Solideal 12-16,5 12PR SKS XT TL

Forks Length / Width / Section (mm) – 1200 x 125 x 45

Lifting (Seconds) – 8

Lowering (Seconds) – 5.4

Extension (Seconds) – 5.6

Retraction (Seconds) – 4.3

Crowd (Seconds) – 3.5

Dump (Seconds) – 3.6

Engine brand – Kubota

Engine Norm – Stage 5 / Tier IV Final

Engine Model – V3307-CR-TE5B

Number of Cylinders – 4

Capacity of Cylinders (cm³) – 3331

I.C. Engine power rating – Power (Hp)/(kW) – 75 / 55.4

Max. torque / Engine rotation – 265 Nm @ 1400 tr/min

Drawbar pull (Laden)(daN) – 3550

Transmission Type – Hydrostatic

Number of gears (forward / reverse)- 2 / 2

Max. travel speed (km/h) – 24.9

Parking Brake – Automatic Negative Parking Brake

Service Brake – Oil-Immersed multi-discs braking on front axles

Axle Manufacturer – Dana

Hydraulic Pump Type – Gear Pump

Hydraulic Flow (l/min) / Pressure (bar) – 90 / 235

Engine oil (l) – 11.2

Hydraulic oil (l) – 115

Fuel tank (l) – 63

Enquire